RUST ACTION

FABRIC PRETREATER AND STAIN REMOVER FOR RUST STAINS

• Suitable for the pre- and post- stain removal phases
• Suitable to be used both in professional and industrial laundries
• Optimized to be used with the Oxipur system products in order to decrease the rewashings

Fabric pretreater and stain remover to remove rust stains. Can be used on most fabrics made of cotton, polyester, cotton/polyester, wool, silk and viscose. Ideal for removing stains that cannot normally be removed through mechanical washing, in order to decrease the rewashings.

Dilution

Ready to use.

How to use

Apply the product directly onto the stain. Let it work for 15 minutes, then wash with the cycle suitable for the type of fabric. If the stains are particularly tough, repeat the operation and rub with a brush.

Warnings

Causes severe skin burns and eye damage. Wear protective gloves and eye/face protection. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. Contains HYDROXYETHYLIDENEDIPHOSPHONIC ACID, OXALIC ACID, 2-AMINOETHANOL.

Note

If treating delicate or coloured items, before using, check for colour fastness on a hidden area of fabric. Be particularly careful when using linen, polyamide, Lycra and acrylic fabrics. Store at room temperature. Do not decant the product from the original container. For further information, please contact the Sutter Professional technical service. Sutter Professional cannot be considered liable for any damage due to improper product use.

Only for professional use. Safety data sheet available on request.