ACID AT 100

Acid descaling cleaner

• Phosphoric acid-based
• Buffered formula. Does not corrode surfaces
• Suitable for removing limescale and mineral deposits

Acid cleaner specifically formulated to remove limescale deposits from surfaces. Suitable for first treatment of terracotta, concrete or stone floors.

Dilution

10% - 20% (1 L - 2 L every 10 L of water).

How to use

Dilute the product in water to the recommended concentration. Clean surfaces thoroughly using mechanical means (on floors use single disc machine and black or brown abrasive disc depending on manufacturer). Rinse thoroughly.

Warnings

May be corrosive to metals. Harmful if swallowed. Causes severe skin burns and eye damage. Wash hands thoroughly after handling. Wear protective gloves and eye/face protection. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. Absorb spillage to prevent material damage. Contains PHOSPHORIC ACID.

Note

Do not use on calcareous surfaces (marble, terrazzo, marble composition and travertine, etc.). Before use, please always refer to the Technical Data Sheet and the Safety Data Sheet, with the exposure scenario, of the product. Use the PPE specified in the Safety Data Sheet. Sutter Professional cannot be considered liable for any damage due to improper product use. Only for professional use. Safety data sheet available on request.